ADE7816
Data Sheet
Pin No.
24
25
26
27
28
29, 32
35
36
37
38
39
EP
Mnemonic
AVDD
AGND
VDD
CLKIN
CLKOUT
IRQ0, IRQ1
HSCLK
SCLK/SCL
MISO/HSD
MOSI/SDA
SS/HSA
Exposed
Pad
Description
this data sheet as Current Channel D. Connect this input in a single-ended configuration with a maximum
signal level of ±0.5 V with respect to IN.
On-Chip 2.5 V Analog Low Dropout (LDO) Regulator Access. Do not connect external active circuitry to this
pin. Decouple this pin with a 4.7 μF capacitor in parallel with a ceramic 220 nF capacitor.
Ground Reference. This pin provides the ground reference for the analog circuitry. Tie this pin to the analog
ground plane or to the quietest ground reference in the system. Use this quiet ground reference for all
analog circuitry, such as antialiasing filters and current and voltage transducers.
Supply Voltage. This pin provides the supply voltage and should be set at 3.3 V ± 10% for specified operation.
Decouple this pin to AGND with a 10 μF capacitor in parallel with a ceramic 100 nF capacitor.
Master Clock. An external clock can be provided at this logic input. Alternatively, a parallel resonant AT-cut
crystal can be connected across CLKIN and CLKOUT to provide a clock source for the ADE7816 . The clock
frequency for specified operation is 16.384 MHz. Use ceramic load capacitors of a few tens of picofarads (pF)
with the gate oscillator circuit. Refer to the crystal manufacturer data sheet for load capacitance requirements.
A crystal can be connected across this pin and CLKIN (as stated in the description for Pin 27) to provide
a clock source for the ADE7816 . The CLKOUT pin can drive one CMOS load when either an external clock
is supplied at CLKIN or a crystal is being used.
Interrupt Request Outputs. These are active low logic outputs. See the Interrupts section for a detailed
presentation of the events that can trigger interrupts.
Serial Clock Output for the HSDC Port.
Serial Clock Input for the SPI Port/Serial Clock Input for the I 2 C Port. All serial data transfers are synchronized to
this clock (see the Communication section). This pin has a Schmidt trigger input for use with a clock source
that has a slow edge transition time (for example, opto-isolator outputs).
Data Output for SPI Port/Data Output for HSDC Port.
Data Input for SPI Port/Data Output for I 2 C Port.
Slave Select for SPI Port/HSDC Port Active.
Exposed Pad. Create a similar pad on the PCB under the exposed pad. Solder the exposed pad to the pad on
the PCB to confer mechanical strength to the package. Connect the pads to AGND and DGND.
Rev. A | Page 10 of 48
相关PDF资料
EVAL-ADE7878EBZ BOARD EVAL FOR ADE7878
EVAL-ADE7880EBZ BOARD EVAL FOR ADE7880
EVAL-ADE7953EBZ BOARD EVAL FOR ADE7953
EVAL-ADF4002EBZ1 BOARD EVAL FOR ADF4002
EVAL-ADG788EBZ BOARD EVALUATION FOR ADG788
EVAL-ADM1021AEB BOARD EVAL FOR ADM1021
EVAL-ADM1023EB BOARD EVAL FOR ADM1023
EVAL-ADM1031EB BOARD EVAL FOR ADM1031
相关代理商/技术参数
EVAL-ADE7854EBZ 制造商:Analog Devices 功能描述:EVALUATION BOARDS - Boxed Product (Development Kits)
EVAL-ADE7858EBZ 制造商:AD 制造商全称:Analog Devices 功能描述:Poly Phase Multifunction Energy Metering IC with per Phase Active and Reactive Powers
EVAL-ADE7878EBZ 功能描述:BOARD EVAL FOR ADE7878 RoHS:是 类别:编程器,开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:PCI Express® (PCIe) 主要目的:接口,收发器,PCI Express 嵌入式:- 已用 IC / 零件:DS80PCI800 主要属性:- 次要属性:- 已供物品:板
EVAL-ADE7880EBZ 功能描述:BOARD EVAL FOR ADE7880 RoHS:是 类别:编程器,开发系统 >> 评估演示板和套件 系列:* 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 主要目的:电源管理,电池充电器 嵌入式:否 已用 IC / 零件:MAX8903A 主要属性:1 芯锂离子电池 次要属性:状态 LED 已供物品:板
EVAL-ADE7880EBZ 制造商:Analog Devices 功能描述:ADE7880, ENERGY METER, 3 PH, SPI, I2C, E
EVAL-ADE7913EBZ 制造商:AD 制造商全称:Analog Devices 功能描述:3-Channel, Isolated, Sigma-Delta ADC with SPI
EVAL-ADE7953EBZ 功能描述:BOARD EVAL FOR ADE7953 RoHS:是 类别:编程器,开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:PSoC® 主要目的:电源管理,热管理 嵌入式:- 已用 IC / 零件:- 主要属性:- 次要属性:- 已供物品:板,CD,电源
EVAL-ADF4001EBZ2 制造商:Analog Devices 功能描述:Evaluation Board For Pll Frequency Synthesizer 制造商:Analog Devices 功能描述:ADF4001 PLL SYNTHESIZER EVAL BOARD